郭向朝,刘作娇,李海兵,胡丽丽.铈钨电极的热处理工艺对发射性能的影响[J].稀有金属材料与工程,0,():-.[Guo Xiangchao,Liu Zuojiao,Li Haibing,Hu Lili.Effect of Heat Treatment Process of Cerium Tungsten Electrode on Emission Mechanism[J].Rare Metal Materials and Engineering,0,():-].
本文是作者原稿,未经编辑加工,请引用时标明待出版或者标注网页。最终应以正式出版稿为准。
铈钨电极的热处理工艺对发射性能的影响
投稿时间:2020-05-13  修订日期:2020-06-18
中文关键词:  铈钨电极  前处理工艺  表面形貌  发射性能
基金项目:
中文摘要:
      采用真空高温和真空高频两种热处理工艺对铈钨电极进行热处理,利用金相显微镜、电子探针显微分析仪(EPMA)和 X-射线光电子能谱(XPS)等测试分析方法对热处理前后的铈钨电极表面金相形貌和铈元素的浓度-深度分布及价态演变进行研究,以此分析了电极中铈元素的扩散和富集的行为机理,阐明了铈钨电极热处理工艺对其制灯后发射性能的影响。
Effect of Heat Treatment Process of Cerium Tungsten Electrode on Emission Mechanism
英文关键词:cerium-tungsten electrodes  pretreatment process  surface morphology  emission performance
英文摘要:
      Two different heat treatment processes, vacuum high temperature and vacuum high frequency, are used to pre-treat cerium-tungsten electrodes for high-power pulsed xenon lamps. The metallographic morphology and the concentration-depth distribution and the evolution of valence state of cerium element of the cerium-tungsten electrodes were studied by some analysis and testing methods, like metallographic microscope, Electron probe micro-analyzer(EPMA) and X-ray photoelectron spectroscopy (XPS). The concentration-depth distribution of the elements was studied to analyze the behavior mechanism of the diffusion and enrichment of the cerium element in the electrode sample, and the effect of the heat treatment process of the cerium-tungsten electrode on the emission performance after lamp manufacture was clarified.
作者单位
郭向朝 中国科学院上海光学精密机械研究所 
刘作娇 中国科学院上海光学精密机械研究所 
李海兵 中国科学院上海光学精密机械研究所 
胡丽丽 中国科学院上海光学精密机械研究所 
摘要点击次数: 30
全文下载次数: 0
  查看/发表评论  
关闭